Elecktron-400VC Stencil Cleaner

Elecktron-400VC Stencil Cleaner

Enclosed single chamber loop cleaning systems for Misprints, Stencils, Squeegees  and Screens.

Full controlled isolated stages including cleaning cycle, optional pre-rinse, DI water rinse all with air drying stages between each cycle, followed by heated forced air drying.  Ensures cleaning to the very highest standard and guarantees the accuracy and repeatability of your print process.

Elektron 400VC:- Data Sheet

Alternative Crystal 960   –   Data Sheet

Click here for circuit board cleaning


The Electron is a compactly designed cleaning system in a full stainless steel finish with integrated smart solutions to achieve high productivity and low operating costs. It is completely engineered and produced in Slovenia.


Industrial quality pumps and filter systems
Industrial quality pumps and filter systems
  • Single chamber
  • 2 tanks / 3 pumps
  • 100% closed loop circuit
  • Horizontal CSR® (Cepter Spray Rotor)
  • 10,1” touchscreen display
  • Coarse filter inside process chamber
  • Sediment filter inside fluid tanks
  • Fine 10” filter in each circuit
  • Cleaning fluid heater
  • Rinsing fluid heater
  • Final rinsing fluid heater

    Spay-Arm, Guide rails and support rollers
    Spay-Arm, Guide rails and support rollers
  • 2 Air heaters
  • Electric safety door locker
  • Complete machine body in stainless steel


  • Optional equipment
  • 3 tanks / 4 pumps
  • Cartridge for deionized and demineralized water
  • Active Carbon filter
  • Compressed air drying system combined with CSR® (Cepter Spray Rotors) with special nozzles
  • FDS® (Fluid Drain System)
  • Conductivity measurement / pre-rinse circuit
  • Fluid leakage tray in stainless steel
  • Leakage warning system
  • Status light
  • Mechanical carrier frame

Technical data

Chamber dimensions W 400 mm x D 1.000 mm x H 1.000 mm
Capacity Screens, stencils, frames up to size D 980 mm x H 910 mm
Volume cleaning tank 65 l
Volume rinsing tank 65 l
Exhaust connection Ø 100 mm
Power supply 400 V AC, 25A / 3 Ph / 50 Hz
Power consumption ca. 3,3 kW
Temperature range cleaning adjustable up to 65°C
Temperature range rinsing adjustable up to 65°C
Temperature range drying adjustable up to 95°C
Filter system 3-stage: 1. coarse filter < 2 mm; 2. sediment filter inside fluid tanks; 3. fine filter 10” (1 – 100 µm)
Conductivity range 0 – 300 µS/cm
Noise level < 70 dB
Dimensions W 980 mm x D 1.580 mm x H 1.900
Weight 480 kg