Table-top PCB cleaning

System 1000 Bench-top PCB cleaning machine

A bench mounted aqueous cleaning and drying machine for assembled printed circuit boards, also cleans solder paste from mis-printed boards.

Standard cleaning cycles can be stored for instant recall, a cleanliness report is printed out at the end of the cycle.

Efficient removal of rosin and no clean fluxes, water soluble fluxes paste and general contamination.

For larger floor mount system see:- System-2000

For larger closed loop systems and greater through-put see:  Cepter-170



  • Deionised Water Rise Option is standard  for all Blundell machines. The NE ion exchanger operates on a mixed bed, anionic and cationic resin mix system and provides high-purity, fully deionised water in seconds. By an optimal water distribution and guidance technology, the capacity of the high performance exchanger resin is efficiently used. In this way these units achieve a water quality of better that 8μ,S/cm.
  • Specially developed eco-friendly saponifiers are used together with activators where necessary.
  • Max PCB size up to 390 x 260mm
  • Basket dimensions: 390 x 380mm.
  • The high-purity water has a neutral pH and is free from all dissolved salts as well as silica and carbon dioxide.
  • Microprocessor based system

Designed to clean:

  • PCB s,
  • Small Stencils
  • Occasional Misprints
  • Rosin Flux
  • Low Solids Fulx


  • Capacity:- 48 Eurocard sized boards
  • Cleaning Period:- approx 40 minutes
  • Drying Period:- approx 45 minutes
  • Circuit board size with basket:- 340 x 260mm

For large boards and greater through-put see the Cepter-170