Mistral-360 Convection Reflow

The Mistral 360 convection reflow

This compact tunnel oven uses re-circulated hot air to accomplish reflow at much lower temperatures than IR systems. Using constant, even heating, a great variety of board sizes will reach reflow temperature with the same heat profile. By eliminating set-up time your production line can work to its fullest capacity.

Convection heating provides other advantages over IR. In addition tot the wide process window, it works with:
•No shadowing       •No colour sensitivity      •No belt load sensitivity

•No hot spots          •No cold solder joints

See also:-  Mistral-260    TWS1385

Description

Mistral-360

With a belt width of 36 cm (over 14”) and consistent temperature across the entire width the Mistral can easily accommodate your entire production line with speed ups to 1.20 meters/minute. User friendly touch screen with total control. The colour graphics system ensures swift operator training with simple menu driven commands. In most cases the operators are self-sufficient within minutes of their introduction to the system. The easy-to-use comprehensive program includes: 4 zone temperature control. Full process monitoring. Built-in profiling.

Technical information

•Power requirements: 220/380 VAC 3-phase+N, other rating available.
•Rated power max.: 7800 W
•Thermocouples electronically monitored.
•Stainless steel spring wires conveyor belt.
•Conveyor speed: 10–120 cm/min. (4-48 inch/min.)
•Heat-up time: approx. 15 min.
•Full colour 3,8”TFT touch screen.
•Dynamic warming-up control ensuring stable temperatures
•and virtually no overshoot.
•USB and Ethernet ports for direct printing or external storage
•and remote service.
•Profiling software for temperature data recording.
•Graphic display mode for viewing temperature on a time base.
•3 pre-heat and 1 reflow zone.
•Up to 300ºC for lead free soldering.
•Solder fume extraction fan.
•Bottom cooling fans at offload section.
•365mm soldering width.
•Clearance for assemblies up to 25 mm (1 inch.)
•Length process chamber: 1400 mm (55 inch.)
•Dimensions: 2240 x 755 x 350 mm ( L x W x H)
•Net weight: 160 kg