02476 210270 sales@blundell.co.uk
Iemme-PLUS-8

6-Iemme Plus-8 Convection Reflow Oven

The Plus 8 has eight forced air convection heating zone plus cooling at exit and provides a highly efficient oven at a very competitive price.

PDF:- Iemme+8

See also:- NeoFlow-20    –    Hotflow 3/14e   –   Iemme Plus-14

 

Category: Tags: ,

Iemme Plus-8

Features and specifications

  • Heating system at forced convection hot air
  • Surface mounted thermocouples J type for a very fast response to any change of the thermal load
  • Every heated zone is temperature controlled (PID)
  • 8 independently controlled heating zones divided into 4 areas
  • 4 hot forced convection air for bottom zones
  • 4 hot forced convection air for upper zones

Upper hot air zones

  • Heating power 2,5 Kw each
  • Air max working temperature 280° C
  • Length of one zone 300 mm
    • each zone independently controlled by PID system (+2/-2 C° from set point)

Bottom hot air zones

  • Heating power 2,5 Kw each
  • Air max working temperature 280° C
  • Length of one zone 300 mm
    • each zone independently controlled by PID system (+2/-2 C° from set point)

Cooling zone with forced air

  • length of cooling zone covered by fan (3 fans in one row) : 200 mm
  • Total warm up time, below 20 minutes
  • Total air flow 3400 m³/hour

Conveyor unit:

  • Narrow mesh Stainless steel belt
  • Belt speed 0 to 200 cm/min
  • Belt width 457 mm
  • Max PCB width 407 mm
  • Max height of components 40 mm
    • Option :
    • Mesh + chain conveyor
    • Max pcb width 407 mm
    • Min pcb width 50 mm
    • Top side clearance 21 mm
    • Bottom side clearance 19 mm

Control unit – Standard features :

  • Microprocessor based control system
  • Industrial PC with CPU Intel
  • Operating system QNX (unix based real time operating system)
  • RAM size 4 Mb
  • Hard disk driver or in option flash eprom
  • Floppy disk driver 3,5” 1,44 Mb
  • Video adapter board VGA
  • Colour monitor VGA 14”
  • Control keyboard.
  • Capability to store, recall and analyze Reflow programs stored on the hard disk.

Connection ports:

  • 1 RS232-C for transmission receiving data – the same RS232-C also for connection to IM150 profiler device.
  • 1 parallel port for external printing

Various :

  • All power and safety devices are positioned in well protected areas however well and easily accessible
  • 2 emergency stop switches
  • Main power switch with magneto thermal protection
  • IM 150 hardware device (optional) :
    • Microprocessor based device designed to collect and store 3 temperatures by using 3 thermocouples that can be connected to the instrument.
    • At the end of the test the IM150 needs to be connected to the oven serial port to transfer the data collected and display the thermal profile stored.

IM150 handling software :

  • Dedicated software included into the machine handling software designed to handle the
  • Parameters coming from the IM150 instrument. plus8 page 2
  • In the interest of product improvement IEMME reserves the right to change specs without prior notice
  • IM150 handling software for WINDOWS 9X external PC’s (option) :
    • Dedicated software suitable to install into a Windows 9X operating system personal computers designed to handle the parameters coming from the IM150 instrument. See features here below
  • Main IM150 handling software features :
    • Display the thermal profile curve over an X-Y graphic
    • Compares the thermal profiles stored into memory
    • Statistic information on the curves.
    • Instant analysis of all the points on the curve
    • Display of max temperature
    • Display of min temperature
    • Calculation of slope (value time/temperature)

Utilities required standard : 380 V 3 phases + N + GND

  • Electrical power supply 380 V 50 Hz
  • 3 phases + Neutral + GND
  • 21 Kw (max at starting time), 32 Amperes
  • Main power needs 1 cable with 5 wires (3 phases + Neutral + GND) 16 mm² each wire

Utilities required option (versions for foreign market) : 220 Volts 3 Phases + GND

  • Electrical power supply 220 V 60 Hz
  • 3 phases + GND
  • 21 Kw (max at starting time), 55,5 Amperes
  • Main power needs 1 cable with 4 wires (3 phases + GND) 25 mm² each wire

Exhaust :

  • Total flow needed : 300 m³/h
  • Distance between two ducts : 1328 mm

Dimensions :

  • Length 2890 mm
  • Width (top cover closed) 1020 mm
  • Width (top cover opened) 1250 mm
  • Height (top cover closed) 1190 mm
  • Height (top cover opened) 1750 mm (feet at 95 mm from the ground floor)
  • Tunnel length 1240 mm (area covered by heating panels)
  • Total tunnel length 1670 mm
  • Conveyor height 830 mm (-0 +50 mm)

Dimensions with pallet : at time of publication

  • Width 1200 mm
  • Height 1500 mm
  • Weight :
  • 350 Kg (without packing)
  • 390 Kg (with pallet)